KLIMABONUS 2026 Energy Premiums Luxembourg — subsidy deducted from your invoice ! Roofing, windows, solar: get Klimabonus Wunnen 2026 subsidies for your work. Learn more →
Isolation-toit

Roof Thermal Bridges in Luxembourg: Fix & Save 2026

9 min de lecture Samuel Thiret — Founder of Satyvo SA

At a glance

  • A roof thermal bridge can increase heat loss by 10-30% and cause condensation and mould.
  • Critical points in Luxembourg: eaves, valleys, chimneys, dormers, wall-to-roof junctions and roof trusses.
  • Detection combines visual inspection, infrared thermography and linear thermal transmittance (psi) calculation.
  • Treatment uses thermal breaks, continuous sarking insulation (R ≥ 6) or loft insulation (R ≥ 7).
  • Klimabonus Wunnen 2026 replaces PRIMe House and covers up to 50% of roof insulation, capped at EUR 15,000.

Key information

Klimabonus Wunnen 2026 roof insulation aid Up to 50% of cost, cap EUR 15,000 (R ≥ 6 sarking, R ≥ 7 loft)
Super-reduced VAT for renovation 3% for homes over 2 years old (works and materials)
Roof window aid EUR 70 per m² of glazing replaced
Photovoltaic aid Up to EUR 10,000 (about EUR 8,300 for 10 kWp, max from 15 kWp)
Home battery aid Up to EUR 2,250
Typical psi of untreated thermal bridge 0.3 to 1.2 W/m.K depending on junction type
Average annual extra cost per thermal bridge EUR 30 to EUR 120 per year for a detached house
Payback for thermal bridge treatment 5 to 12 years depending on scope and subsidies used

« Treating thermal bridges at the same time as insulation is the most cost-effective strategy: it avoids redoing work later and ensures the insulation performs as designed. »

M
Marc Hoffmann

Energy Advisor, Klima-Agence

« Infrared thermography is reliable only when performed in cold, dry weather. A proper report quantifies temperature differences and pinpoints defects. »

S
Sophie Wagner

Certified Thermographer, Luxembourg

What is a roof thermal bridge?

A thermal bridge is an area of the building envelope where thermal resistance is locally lower than in the surrounding walls. In a roof, it forms wherever insulation is interrupted, compressed or replaced by a highly conductive material such as concrete, steel or solid timber. Heat then escapes preferentially along this path, creating a concentrated heat flow.

In Luxembourg, where winters are cool and humidity is frequent, these defects have two major consequences: excess heating consumption and a risk of condensation inside the structure. Over time, this can damage the roof frame, stain ceilings and encourage mould, with a direct impact on occupants' health and property value.

There are two families: linear thermal bridges (along a junction, such as the eaves or verge) and point thermal bridges (at a specific spot, such as a penetrating fixing or a poorly insulated rafter). Their intensity is measured by the psi coefficient, expressed in W/m.K for linear bridges and W/K for point bridges.

The most common thermal bridges on Luxembourg roofs

Luxembourg's building stock is varied: older detached houses, recent apartment blocks, converted farm buildings. Each type has its weak points. Here are the locations most frequently found during diagnostics.

  • Wall-to-roof junction (eaves and verge): roof insulation often stops at the wall face, leaving a significant linear thermal bridge.
  • Chimneys and flues: masonry passes through the roof without a break, creating a major cold spot.
  • Dormers and roof windows: metal or untreated timber frames are weak points.
  • Valleys and hips: intersecting roof slopes make continuous insulation difficult.
  • Exposed trusses and purlins: when insulation is interrupted by the frame, each rafter becomes a repeated thermal bridge.
  • Roof penetrations: ventilation ducts, antennas, boiler flues - every unsealed penetration is a weak point.
  • Slab edge: in flat roofs, the junction between the concrete slab and the parapet is critical.

A precise diagnosis helps prioritise these defects. Not all have the same impact: a linear thermal bridge at the verge alone can account for 15% of heat loss in a poorly insulated roof.

How to detect thermal bridges: methods and tools

Detection uses three complementary approaches. The first is visual inspection: when visiting the loft or roof, look for areas where insulation is missing, compressed, wet or bypassed. Damp marks, dark rings on ceilings and rust spots on fixings are reliable clues.

The second method is infrared thermography. Performed by a professional, ideally in winter during cold, dry weather, it reveals surface temperature differences. Thermal bridges appear as colder areas on the inside or warmer areas on the outside. A serious thermographic report quantifies the differences and precisely locates defects.

The third approach is regulatory calculation. In Luxembourg, energy performance requirements limit thermal bridges. An engineering office can calculate psi values according to ISO 10211 and check project compliance. This step is often required to obtain Klimabonus Wunnen 2026 subsidies.

  • Visual inspection: free, DIY-friendly, but limited to accessible defects.
  • Infrared thermography: costs EUR 800 to EUR 1,500 for a full audit, very reliable.
  • Psi calculation by an engineering office: necessary for major renovation projects and subsidies.
  • Air tightness test (Blower Door): detects air leaks often associated with thermal bridges.

Consequences of an untreated thermal bridge

The effects of a thermal bridge go far beyond a higher heating bill. Condensation is the main risk: when the surface temperature drops below the dew point, indoor humidity turns into liquid water. This water soaks insulation materials, reduces their performance and feeds mould.

Structurally, repeated moisture can rot roof timbers, corrode metal fixings and crack render. Repairs then become much more expensive than treating the thermal bridge in the first place. Financially, each untreated thermal bridge increases consumption by EUR 30 to EUR 120 per year for a detached house, depending on its size and location.

Finally, thermal bridges reduce comfort: cold surfaces, perceived draughts, a feeling of discomfort even with the heating on full. With energy prices still high in Luxembourg, treating these defects is a profitable medium-term investment.

Technical solutions for treating roof thermal bridges

Treatment is based on a simple principle: ensure insulation continuity and break conduction paths. Several techniques exist, to be adapted to the configuration.

Installing a thermal break is the most effective solution for wall-to-roof junctions. It is a rigid insulating element placed between the masonry and the structure, interrupting the heat flow. For chimneys, an insulating casing or full perimeter insulation is preferred.

Sarking insulation (insulating the roof from the outside) is particularly recommended: it wraps the frame without interruption and eliminates thermal bridges linked to rafters. It requires R ≥ 6 to be eligible for Klimabonus Wunnen 2026. For unused lofts, blown or roll insulation with R ≥ 7 is eligible, provided junctions and penetrations are carefully treated.

Type of thermal bridgeRecommended solutionEstimated gain
Wall-to-roof junctionThermal break + continuous insulationHigh (up to 20% of losses)
ChimneyInsulating casing or perimeter insulationMedium to high
DormerReinforced insulation of framesMedium
Roof penetrationsInsulating sleeves and air sealingLow to medium
Exposed trussesSarking insulation or cross-counter insulationHigh

In all cases, air tightness must be carefully executed: a thermal bridge is often accompanied by an air leak that worsens losses. The use of air-barrier membranes and specific adhesives is essential.

Costs, subsidies and profitability in Luxembourg

The cost of treating thermal bridges varies with scope. For a detached house, expect EUR 2,000 to EUR 8,000 to treat the main weak points, excluding a full roof renovation. A complete sarking insulation with thermal bridge treatment can reach EUR 25,000 to EUR 40,000 for a 100-150 m² roof.

Good news: Klimabonus Wunnen 2026, which replaced PRIMe House in January 2026, supports this work. Roof insulation is subsidised up to 50% of the cost, capped at EUR 15,000, provided R ≥ 6 for sarking or R ≥ 7 for lofts. Roof windows receive EUR 70 per m² of glazing replaced. The super-reduced VAT of 3% applies to homes over 2 years old.

For photovoltaics, aid of up to EUR 10,000 is available (about EUR 8,300 for 10 kWp, maximum reached from 15 kWp), and up to EUR 2,250 for a home battery. These subsidies can be combined with insulation, improving the overall profitability of the project.

  • Application to be submitted on guichet.public.lu and klima-agence.lu before work starts.
  • Detailed quotes and a compliance certificate are required.
  • Respect minimum R values to guarantee eligibility.
  • Use qualified tradespeople to avoid poor workmanship.

Payback is generally between 5 and 12 years, combining energy savings and public subsidies. A prior energy audit helps optimise the choice of works.

Typical renovation example in Luxembourg

Take the illustrative case of a detached house built in 1985 in the canton of Esch-sur-Alzette, with a 120 m² roof and converted loft. A thermographic diagnosis reveals three major thermal bridges: the wall-to-roof junction, a masonry chimney and two poorly insulated dormers.

The typical project includes: installing a thermal break at the verge, insulating the chimney casing, reinforcing dormer insulation and blowing loft insulation to R 7.5. The total cost is around EUR 14,000. Thanks to Klimabonus Wunnen 2026, the subsidy reaches EUR 7,000, and 3% VAT reduces the bill. The remaining cost is about EUR 7,500.

Estimated annual savings are EUR 600 to EUR 900 on heating, not counting improved comfort and eliminated condensation risks. Payback is about 9 years. This illustrative scenario shows the value of treating thermal bridges at the same time as insulation.

Mistakes to avoid and best practices

Many renovations fail because insulation is installed without treating thermal bridges. Adding 30 cm of insulation to a roof whose verges remain untreated is like plugging a colander: losses persist in the same places, and condensation can even worsen.

Another common mistake: neglecting air tightness. A thermal bridge is almost always accompanied by an air leak, which carries moisture into the structure. Using suitable membranes and adhesives is essential, as is checking penetrations.

  • Never interrupt insulation at rafters or purlins.
  • Always treat junctions before installing the main insulation.
  • Use a qualified professional for thermography and psi calculation.
  • Keep invoices and certificates for the subsidy application.
  • Check compliance with the grand-ducal regulation on energy performance.

Finally, consider data protection: if you share photos or thermographic reports, ensure GDPR compliance and CNPD recommendations, especially if occupants or neighbours are identifiable.

Conclusion: act early to save sustainably

Roof thermal bridges are invisible but costly defects. Detecting them requires careful inspection, ideally completed by infrared thermography. Treating them involves proven technical solutions: thermal breaks, continuous sarking or loft insulation, careful air tightness.

With Klimabonus Wunnen 2026, subsidies are attractive: up to 50% of roof insulation, capped at EUR 15,000, plus 3% VAT. By combining these schemes, a high-performance renovation becomes accessible and profitable. Don't wait for damage to appear: treating thermal bridges from the first insulation intervention is the best strategy for a healthy, energy-efficient home.

Frequently asked questions

It is an area where insulation is interrupted or replaced by a conductive material, creating a preferential heat flow between inside and outside. In roofs, it is found at wall-to-roof junctions, chimneys, dormers and penetrations.

Visible signs include damp marks, mould, cold surfaces or abnormally high heating consumption. For a precise diagnosis, call a certified thermographer: infrared analysis reveals problem areas.

Klimabonus Wunnen 2026, which replaced PRIMe House in January 2026, subsidises roof insulation up to 50% of the cost, capped at EUR 15,000, with R ≥ 6 for sarking or R ≥ 7 for lofts. Roof windows receive EUR 70 per m² of glazing replaced.

For a detached house, expect EUR 2,000 to EUR 8,000 to treat the main weak points. A complete insulation with thermal bridge treatment can cost EUR 25,000 to EUR 40,000 for 100-150 m². Subsidies significantly reduce the remaining cost.

Some small interventions are feasible, but most require a qualified professional, especially for sarking insulation, thermal breaks and air tightness. Poor work can worsen condensation and cancel subsidies.

⚠️ Disclaimer : Prices are indicative estimates (±25-35%). Only a professional quote is binding. Legal notices.

Data verified in April 2026

⚡

Estimate your renovation costs

Free calculator with Klimabonus subsidies, 3% VAT and 2026 prices

Use the calculator

Ready to get started?

Compare free quotes from verified professionals.

Get a free quote

Recevez vos devis gratuits

Comparez des devis de professionnels près de chez vous

Étape 1 sur 3
1
Vos coordonnées
2
Votre projet
3
Envoi

En soumettant ce formulaire, vos informations sont transmises à notre partenaire Alrootel qui vous met en contact avec des professionnels qualifiés. Ce service est gratuit — nous percevons une commission d'affiliation. Politique de confidentialité

Demande envoyée !

Vous recevrez des devis de professionnels près de chez vous.